 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TPC6601 TOSHIBA Transistor Silicon PNP Epitaxial Type TPC6601 High-Speed Switching Applications DC-DC Converter Applications * * * High DC current gain: hFE = 200 to 500 (IC = -0.3 A) Low collector-emitter saturation voltage: VCE (sat) = -0.2 V (max) High-speed switching: tf = 90 ns (typ.) Unit: mm Absolute Maximum Ratings (Ta = 25C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Base current Collector power dissipation Junction temperature Storage temperature range DC t = 10 s DC Pulse Symbol VCBO VCEO VEBO IC ICP IB PC (Note 1) Tj Tstg Rating -50 -50 -7 -2.0 -3.5 -0.2 0.8 1.6 150 -55 to 150 Unit V V V A A W C C JEDEC JEITA TOSHIBA 2-3T1A Note 1: Mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2) Weight: 0.011 g (typ.) Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-10 TPC6601 Electrical Characteristics (Ta = 25C) Characteristics Collector cut-off current Emitter cut-off current Collector-emitter breakdown voltage DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Rise time Switching time Storage time Fall time Symbol ICBO IEBO V (BR) CEO hFE (1) hFE (2) VCE (sat) VBE (sat) tr tstg tf Test Condition VCB = -50 V, IE = 0 VEB = -7 V, IC = 0 IC = -10 mA, IB = 0 VCE = -2 V, IC = -0.3 A VCE = -2 V, IC = -1.0 A IC = -1.0 A, IB = -33 mA IC = -1.0 A, IB = -33 mA See Figure 1 circuit diagram. VCC -30 V, RL = 30 - IB1 = -IB2 = -33 mA Min -50 200 100 Typ. 60 250 90 Max -100 -100 500 -0.2 -1.1 ns V V Unit nA nA V VCC 20 s IB2 IB1 IB2 Duty cycle < 1% IB1 RL Output Input Figure 1 Switching Time Test Circuit & Timing Chart Circuit Configuration 6 5 4 Marking Lot code (month) Lot No. Part No. (or abbreviation code) H3A Product-specific code Lot code (year) A line indicates lead (Pb)-free package or lead (Pb)-free finish. 1 2 3 Pin #1 2 2006-11-10 TPC6601 IC - VCE -3.0 -100 -80 -60 -40 -30 -20 10000 Common emitter VCE = -2 V Single nonrepetitive pulse hFE - IC (A) -2.4 DC current gain hFE Collector current IC 1000 25 Ta = 100C -1.8 -10 -6 -4 -1.2 -55 100 -0.6 IB = -2 mA Common emitter Ta = 25C Single nonrepetitive -1.6 -2.0 -2.4 0 0 0 -0.4 -0.8 -1.2 10 -0.001 -0.01 -0.1 -1 -10 Collector-emitter voltage VCE (V) Collector current IC (A) VCE (sat) - IC -1 -10 VBE (sat) - IC Base-emitter saturation voltage VBE (sat) (V) Common emitter IC/IB = 30 Single nonrepetitive pulse Collector-emitter saturation voltage VCE (sat) (V) Common emitter IC/IB = 30 Single nonrepetitive pulse -0.1 Ta = 100C -55 -0.01 25 25 -1 -55 Ta = 100C -0.001 -0.001 -0.01 -0.1 -1 -10 -0.1 -0.001 -0.01 -0.1 -1 -10 Collector current IC (A) Collector current IC (A) IC - VBE -3.0 Common emitter VCE = -2 V Single nonrepetitive pulse Collector current IC (A) -2.4 -1.8 -1.2 Ta = 100C -0.6 25 -55 0 0 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 Base-emitter voltage VBE (V) 3 2006-11-10 TPC6601 Transient Thermal Resistance 1000 rth - tw Transient thermal resistance rth (j-a) (C/W) 100 10 Curves should be applied in thermal limited area. Single nonrepetitive pulse area: 645 mm2) 1 0.001 0.01 0.1 1 10 100 1000 Ta = 25C Mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu Pulse width tw (s) Safe Operating Area -10 IC max (pulsed) 10 ms 1 ms 100 s 10 s IC max (continuous) 100 ms (A) Collector current IC -1 10 s DC operation (Ta = 25C) : Single nonrepetitive pulse Ta = 25C -0.1 Note that the curves for 100 ms, 10 s and DC operation will be different when the devices aren't mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2). These characteristic curves must be derated linearly with increase in temperature. -0.01 -0.1 -1 -10 Collector-emitter voltage VCE (V) VCEO max -100 4 2006-11-10 TPC6601 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-10 |
Price & Availability of TPC6601
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |